Commit 14577deb authored by jselbie's avatar jselbie

updated version info

parent d6d816e9
......@@ -19,3 +19,7 @@ Version 1.2.3 - Globally disable SIGPIPE
Version 1.2.4 - Fix a socket bug unique to Windows.
Version 1.2.5 - Block IPv6 sockets from receiving IPv4 traffic
STUNTMAN - An open source STUN server
Version 1.2.4
April 24, 2013
Version 1.2.5
June 23, 2013
---------------------------------------------------------
......
STUNTMAN - An open source STUN server
Version 1.2.5
June 23, 2013
---------------------------------------------------------
Features:
Compliant with the latest RFCs including 5389, 5769, and 5780. Also includes
backwards compatibility for RFC 3489.
Supports both UDP and TCP on both IPv4 and IPv6.
Client test app provided.
Stun server can operate in "full" mode as well as "basic" mode. Basic mode
configures the server to listen on one port and respond to STUN binding
requests. Full mode configures the service to listen on two different IP
address interfaces (if available) and provide NAT behavior and filtering
detection support for clients.
Support for running a full mode STUN service on an Amazon EC2 instance. Run
"stunserver --help" for visit www.stunprotocol.org on how to configure this
mode.
Open source Apache license. See LICENSE file fore more details.
---------------------------------------------------------
Known issues:
TLS mode has yet to be implemented.
Server does not honor the stun padding attribute. If someone really wants
this support, let me know and I will consider adding it.
By default, the stun server operates in an open mode without performing
authentication. All the code for authentication, challenge-response, message
hashing, and message integrity attributes are fully coded. HMAC/SHA1/MD5
hashing code for generating and validating the message integrity attribute
has been implemented and tested. However, the code for validating a username
or looking up a password is outside the scope of this release. Instead,
hooks are provided for implementors to write their own code to validate a
username, fetch a password, and allow/deny a request. Details of writing
your own authentication provider code are described in the file
"server/sampleauthprovider.h".
Dependency checking is not implemented in the Makefile. So if you need to
recompile, I recommend "make clean" from the root to preceed any subsequent
"make" call.
If you run an instance of stunserver locally, you may observe that
"stunclient localhost" may not successfully work. This is because the server
is not listening on the loopback adapter when running in full mode. The
workaround is to specify the actual IP address that the server is listening
on. Type "ifconfig" to discover your IP address (e.g. 10.11.12.13) followed
by "stunclient 10.11.12.13"
---------------------------------------------------------
Testing:
Fedora 15 with gcc/g++ 4.6.0
Fedora 17 with gcc/g++ 4.72
Ubuntu 11 with gcc/g++ 4.5.2
Ubuntu 12 with gcc/g++ 4.6.3
Ubuntu 12 with clang/clang++ 3.0
Amazon AWS with gcc/g++ 4.4
MacOS Snow Leopard (will not compile on earlier versions without updating to
a newer version of gcc/g++)
MacOS Lion (with Clang compiler)
FreeBSD 9.0 with gcc/g++ 4.2.1
Solaris 11 with gcc/g++ 4.5.2
Parsing code has been fuzz tested with zzuf. http://caca.zoy.org/wiki/zzuf
---------------------------------------------------------
Prerequisites before compiling and running.
The short summary is that you need a C++ compiler (g++ preferred or
clang++), GNU make, Boost header files, and the OpenSSL development files in
order to compile the code. Below are the set of package installer commands
that you can type from the command line to get the tools and libraries you
need.
Debian/Ubuntu/Mint
sudo apt-get install g++
sudo apt-get install make
sudo apt-get install libboost-dev # For Boost
sudo apt-get install libssl-dev # For OpenSSL
RedHat/Fedora and EC2 Amazon Linux AMI
sudo yum groupinstall "Development Tools" # For g++, make, et. al.
sudo yum install boost-devel # For Boost
sudo yum install openssl-devel # For OpenSSL
Solaris and Mac
OpenSSL is already installed.
Install Boost locally as per instructions below, then uncomment and edit
the top line of the common.inc file.
Manual Boost install
The compiled Boost runtime is not necessary. Just obtaining and unpacking
the Boost source code distribution from www.boost.org will suffice. If you
do not have the adminstrative privaleges to install the Boost distribution
into a standard system include path, you may uncomment and edit the top
line of the common.inc file for the BOOST_INCLUDE variable. The common.inc
file is in the same folder as this README file.
Manual OpenSSL install
You can obtain the OpenSSL development files and runtime from
www.openssl.org. On most systems with development tools already installed,
OpenSSL include files are already installed in the standard include path.
If this is not the case, you can uncomment and edit the common.inc file to
have the OPENSSL_INCLUDE variable defined.
Other prerequisites
pthreads and perl. I've never come across a system where this wasn't
already pre-installed.
---------------------------------------------------------
Compiling and running
Got Boost and OpenSSL taken care of as described above? Good. Just type
"make" (or "gmake" on some systems). There will be three resulting binaries
in the root of the source code package produced.
stuntestcode - This is the unit test code. I highly recommend you run this
program first. When run, you'll see a series of lines being printed in
regards to different code paths being tested. If you see any line that ends
in "FAIL", we likely have a bug. Please contact me immediately if you see
this.
stunserver - this is the server binary. Run "./stunserver --help" for
details on running this program. Running this program without any command
line arguments defaults to listening on port 3478 on all adapters.
stunclient - this is the client test binary. Run "./stunclient --help" for
details on running this program. Example: "./stunclient stun.selbie.com"
---------------------------------------------------------
Firewall
Don't forget to configure your firewall to allow traffic for the local ports
the stunserver will be listening on!
---------------------------------------------------------
Feature roadmap (the features I want to implement in a subsequent release)
Cleanup Makefile and add "configure" and autotools support
Finish Windows port and able to run as a Windows service
Scale across more than one CPU (for multi-core and multi-proc machines). The
threading code has already been written, just needs some finish work.
TLS support
---------------------------------------------------------
Contact the author
John Selbie
john@selbie.com
STUNTMAN - An open source STUN server
Version 1.2.4
April 24, 2013
Version 1.2.5
June 23, 2013
---------------------------------------------------------
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment